Complete your door system with a variety of optional accessories. Overhead Door™ operator accessories help enhance the operation of your facility as well as provide added safety and convenience.Not sure what you need? Contact us or send us a service request so we can help you decide which is best for your application.
Provides an automatic door closing feature that is easily installed and automatically recognized by the operator system. Available for RMX®, RSX® and RHX® operators.
The Timer to Close feature can be selected to start when the door is opened from inputs such as the open button on the wall control, optional radio control input or auxiliary open input via an optional device. The module is installed in the operator electronic box and connects to the main circuit board through an expansion port connector.
Provides dry relay contacts at door limit positions, lamp output contacts and a selectable ADA output to sound a horn or run a flashing light. Available for RMX®, RSX®, and RHX® operators.
Expand the features of your X-Series Commercial Operator to integrate with other devices such as lights, monitoring systems and more with the Auxiliary Output Module. This optional component board provides dry relay contacts at door limit positions, as well as lamp output contacts and a selectable Americans with Disabilities Act output to sound a horn or run a flashing light. The module is installed in the operator electric box and connects to the main circuit board through an expansion port connector.
Provides an interface between two-wire monitored sensing edges and our X-Series operators.
The UL 325 2010 compliant Monitored Edge Interface Module allows the operator to monitor the sensing edge; providing advanced safety and security to the door system. This module serves as an interface between two-wire monitored sensing edges and our X-Series operators. The module installs easily and is automatically recognized by our operators.
To maintain UL 325 2010 compliance when using a sensing edge as a primary safety device you must use either the Monitored Edge Interface Module or the Timer To Close Module.
Radio transmitters may be one, two, three, four-button, or open/close/stop. Available for all commercial operators.
Overhead Door™ commercial radio transmitters are available in the same frequency as your selected transmitter receiver. One, two, three and four button transmitters work with the system and are available in frequencies of 312, 360, 380, and 390 MHz.
Stops and reverses the door upon contact with an obstruction. Available for RMX®, RSX® and RHX® operators.
Sensing edges provide entrapment protection for motor-operated doors by offering an auto reverse or auto stop feature. The Bottom Sensing Edge stops and reverses the door upon contact with an obstruction.
Attached to the leading edge of motor-driven doors, our electrically activated sensing edges offer the most reliable reversing feature available. Our exclusive construction contains two completely flexible, conductive contact elements separated by perforated foam. When touch-activated, the soft foam cushion inside the sensing edge compresses, causing the internal contacts to meet and immediately send an electrical signal to stop or reverse the motor.
Photoelectric safety sensors stop or reverse the door upon obstruction. Available on RMX®, RSX®, and RHX® operators. New NEMA 4/4X sensors now available.
The Safe-T-Beam® is an optional safety device that senses an obstruction and signals the operator to stop or reverse the door. These STBs are UL325 compliant and listed to be used with our X-Series Commercial Operators.
Push-pull button – with mushroom head for use in areas where local activation for egress is required. Optional push-pull button can be surface or flush mounted.
Test key switch – for controlled testing of the egress grille. One test key switch include with the RSX® Egress Operator.
This photo-eye utilizes interference reduction technology, that enables further reduction of interference from reflective surfaces and is compatible with our X-Series operators.
Designed to withstand the challenges of heavy duty commercial and industrial applications. This photo-eye utilizes interference reduction technology or red light technology, which reduces interference from ambient lighting and infrared sensors often encountered around industrial door openings. In addition these monitored retro-reflective photo eyes feature technology that enables these sensors to further reduce interference from reflective surfaces. Ideal for heavy duty door applications.
The Fire Sentinel® is a UL-listed, time-delay door release device that directs a fire door’s closure in an emergency situation.
The adjustable alarm time delay is factory set at 10 seconds but can be adjusted using a dipswitch to change the time for anywhere between 10-60 seconds. The auxiliary 24v DC output can be used to activate additional power devices. The Fire Sentinel comes with back-up power to avoid automatic closure during power failures. It has an ADA sounder/strobe warning before the door closes to alert people that the door is about to close. The fail-to-close safety timer gives you additional assurance of the maxium possible closure. The device will cause the door to stop if there is an obstruction in its pathway. The floor-level trouble indicator provides a visual indication of trouble from the floor.